2.
Pull the drive away from the socket to remove it.
To install the solid-state drive, reverse the removal procedures.
NOTE:
Solid-state drives are designed with a notch to prevent incorrect insertion.
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-4
Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Preparation for disassembly on page
Bottom cover on page
29).
29).
Battery on page
31).
Component replacement procedures
Spare part number
M52821-001
33