Solid-State Drive - HP 13-be0 Series Maintenance And Service Manual

4. Remove the battery from the computer (4).
To replace the battery, reverse the removal procedures.

Solid-state drive

To remove the solid-state drive, use this procedure and illustration.
Table 5-3 Solid-state drive descriptions and part numbers
Description
1 TB, PCIe
512 GB, PCIe
256 GB, PCIe
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the cover over the solid-state drive, and then
remove the cover (2).
32 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page 29).
29).
Battery on page 31).
Spare part number
L85370-005
L85364-005
L85354-005