Display Assembly - HP 245 G8 Maintenance And Service Manual

4. Apply thermal paste on the system board component (1) and heat sink (2).
Reverse this procedure to reassemble and install the heat sink assembly.

Display assembly

To remove the display assembly, use this procedure and illustration.
Table 5-17 Display assembly part descriptions and part numbers
Description
Hinge cover
Display bezel
Webcam/microphone module
HD
VGA
Raw display panel
FHD, antiglare, UWVA
HD, antiglare, WLED SVA
Hinges (left and right)
Display cable
HD display
FHD display
Antennas
Dual
Single
Display enclosure
46 Chapter 5 Removal and replacement procedures for authorized service provider parts
Spare part number
M23371-001
L24465-001
L23237-001
L23238-001
M28173-001
M28174-001
L24470-001
L24492-001
L24493-001
L24640-001
L29012-001