Speakers - HP 245 G8 Maintenance And Service Manual

Table 5-8 Solid-state drive descriptions and part numbers (continued)
Description
1 TB
●
512 GB
●
● 256 GB
Solid-state drive, SATA-3, TLC:
● 256 GB
● 128 GB
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the rubber feet (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the drive to the system board.
2. Remove the drive (2) by pulling it away from the connector.
NOTE:
Reverse this procedure to install the solid-state drive.

Speakers

To remove the speakers, use this procedure and illustration.
Table 5-9 Speakers description and part number
Description
Speakers (includes left and right speakers and cable)
36 Chapter 5 Removal and replacement procedures for authorized service provider parts
Computer feet on page
Bottom cover on page
Battery on page
Solid-state drives are designed with notches to prevent incorrect insertion.
(Preparation for disassembly on page
26).
27).
28).
Spare part number
L85370-005
L85364-005
L85354-005
938184-855
L85346-005
26).
Spare part number
926558-001