Wired Remote Controller Installation
Individual Control with Your Wired Remote Controller
Individual control means that you are using one remote controller to control one indoor unit or ventilator(ERV).
When Connected to an Indoor Unit Only
Outdoor Unit
When Connected to an ventilator(ERV) Only
Master ventilator(ERV)
Ventilator(ERV)
NOTE
• Regardless of the indoor group address (RMC address) or the ventilator(ERV) group address, only the indoor unit
connected to COM2 is individually controlled.
• The power cable (V1, V2) is not connected between indoor units.
8
8
English
COM1 (F1, F2)
Indoor Unit
COM2 (F3, F4)
Wired Remote
Controller
COM1 (F1, F2)
Ventilator(ERV)
COM2 (F3, F4)
Wired Remote
Controller
COM1 (F1, F2)
Indoor Unit
COM2 (F3, F4)
Wired Remote
Controller
Ventilator(ERV)
COM2 (F3, F4)
Wired Remote
Controller
Indoor Unit
COM2 (F3, F4)
Wired Remote
Controller
COM1 (F1, F2)
COM2 (F3, F4)
Wired Remote
Controller