HP 240 G7 Maintenance And Service Manual page 61

a. Detach the camera module (1) from the display back cover. (The module is attached with double-
sided adhesive.)
b. Disconnect the cable (2) from the camera/microphone module.
The camera module is available using spare part number L23237-001.
3. If it is necessary to replace the display panel:
a. Remove the four Phillips M2.0×3.0 screws that secure the panel to the display enclosure.
b. Swing the top edge of the display panel forward and position the panel upside down next to the
display enclosure (1).
c. Release the adhesive support strip (2) that secures the display panel cable connector to the
display panel.
Component replacement procedures 53