Heat sink assembly
Description
Heat sink for use in models with Intel Core processors and integrated UMA graphics
Heat sink for use in models with Intel Core processors and discrete graphics
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
To remove the heat sink assembly from products with integrated UMA graphics:
1.
In the order indicated on the heat sink assembly, remove the four Phillips M2.0×3.0 screws (1) that
secure the heat sink to the computer.
2.
Lift the heat sink assembly from the computer (2).
42
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
26).
27).
Spare part number
L23192-001
L23191-001