Speakers - HP 240 G7 Maintenance And Service Manual

Speakers

Description
Speaker Kit
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Lift the tape that secures the speaker cable to the system board (2), and then lift the speakers from the
computer (3).
Reverse this procedure to install the speakers.
Bottom cover on page
Battery on page 29).
27).
Component replacement procedures
Spare part number
L23221-001
39