System Board Hook - HP 240 G7 Maintenance And Service Manual

System board hook

Description
System board hook
NOTE: Located under the battery, a black plastic piece fits around the screw boss next to the memory
modules. This "hook" is unsecured and can fall out if you tilt the computer. Use the following image to
determine where the hook is properly installed.
Before removing the system board hook, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the system board hook:
▲ Remove the system board hook from the computer.
Reverse this procedure to install the system board hook.
38 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
26).
27).
Spare part number
L23206-001