Solid-State Drive - HP 240 G7 Maintenance And Service Manual

Solid-state drive

Description
256 GB, PCIe, NVMe, value
256 GB, SATA-3, TLC
128 GB, SATA-3, TLC
Optane memory module, 16 GB
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the solid-state drive:
▲ Remove the Phillips M2.0×3.0 screw (1), and then pull the solid-state drive module from the socket (2).
Reverse this procedure to install the solid-state drive.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
26).
27).
Component replacement procedures
Spare part number
L44333-001
L23223-001
L23222-001
L42281-001
35