Summary of Contents for Comtrend Corporation GS-7408
Page 1
Quick Installation Guide GS-7408 | 8-Port Gigabit Ethernet Smart-Lite Switch Product Information I-1. Package Contents GS-7408 Switch Power Cable 4 x Foot Pads Manual CD...
Page 2
I-2. Hardware Overview Front Panel The front panel of the switch consists of: A Series of LED Indicators Rear Panel The rear panel of the switch consists of: 8 x 10/100/1000Mbps RJ-45 Ports AC Power Connector Reset Button...
Page 3
I-3. LED Indicator PWR: Mode LED Status Description Green Power on Power off or fail Link/ACT: LED Status Mode Description 1000Mbps Green On/Blinking connected/data transmitting 10/100Mbps Amber On/Blinking connected/data transmitting Disconnected or fail I-4. Desktop Installation Install the switch on a desktop by attaching the cushioning rubber feet to the bottom corners of the switch to protect against external vibration.
Quick Setup II-1. Switch to End Device 1. Connect the switch to local power with the included power cable. 2. Use a standard Cat 5/5e Ethernet cable to connect the switch to end devices as shown below. Switch ports will automatically adjust to the link rate of the device to which it’s connected.
Page 5
You will be prompted for a username and password. Enter the default username “admin” and the default password “admin”. 3. You will arrive at the switch configuration window as shown below:...
Page 6
Your Device is Now Connected! FOR MORE HELP: For instructions on advanced features, FAQ, etc., please visit our online Product Webpage. For more information: YouTube: https://www.youtube.com/user/ComtrendConnection Facebook: https://facebook.com/Comtrend Website: http://us.comtrend.com/ Support: Visit our website or call 1-877-COMTREND (1-877-266-8736)