Download Print this page
Comtrend Corporation GS-7608 Quick Installation Manual
Comtrend Corporation GS-7608 Quick Installation Manual

Comtrend Corporation GS-7608 Quick Installation Manual

8-port poe gigabit ethernet smart-lite switch
Hide thumbs Also See for GS-7608:

Advertisement

Quick Links

Quick Installation Guide
GS-7608 | 8-Port PoE Gigabit Ethernet Smart-Lite Switch
I
I.
Product Information
I-1. Package Contents
1
4
1.
GS-7608 PoE Switch
2.
QIG
3.
Manual CD
2
5
4.
Power Cable
5.
4 x Foot Pads
6.
Rack-Mount Kit
3
6

Advertisement

loading

Summary of Contents for Comtrend Corporation GS-7608

  • Page 1 Quick Installation Guide GS-7608 | 8-Port PoE Gigabit Ethernet Smart-Lite Switch Product Information I-1. Package Contents GS-7608 PoE Switch Power Cable 4 x Foot Pads Manual CD Rack-Mount Kit...
  • Page 2 I-2. Hardware Overview Front Panel The front panel of the switch consists of: • 8 x 10/100/1000Mbps RJ-45 Ports o Ports 1-8 are PoE Capable • A Series of LED Indicators Rear Panel The rear panel of the switch features the AC power connector...
  • Page 3 I-3. LED Indicator Power/SYS: LED Status Mode Description Power on Green Blinking System boot-up Power off or fail Link/ACT: Mode LED Status Description 1000Mbps Green On/Blinking connected/data transmitting 10/100Mbps Amber On/Blinking connected/data transmitting Disconnected or fail PoE Max: LED Status Mode Description PoE power output is over...
  • Page 4 I-4. Desktop Installation Install the switch on a desktop by attaching the cushioning rubber feet to the bottom corners of the switch to protect against external vibration. Allow adequate space for ventilation between the device and any objects around. I-5. Rack-mounting Installation The switch can be mounted in an EIA standard-sized 19-inch rack that can be placed in a wiring closet with other equipment.
  • Page 5 2. Use the screws provided with the equipment rack to mount the Switch on the rack and tighten it. Rack Installation...
  • Page 6: Quick Setup

    Quick Setup II-1. Switch to End Device 1. Connect the switch to local power with the included power cable. 2. Use a standard Cat 5/5e Ethernet cable to connect the switch to end devices as shown below. Switch ports will automatically adjust to the link rate of the device to which it’s connected.
  • Page 7 3. You will be prompted for a username and password. Enter the default username “admin” and the default password “admin”. 4. You will arrive at the switch configuration window as shown below:...
  • Page 8 Your Device is Now Connected! FOR MORE HELP: For instructions on advanced features, FAQ, etc., please visit our online Product Webpage. For more information: YouTube: https://www.youtube.com/user/ComtrendConnection Facebook: https://facebook.com/Comtrend Website: http://us.comtrend.com/ Support: Visit our website or call 1-877-COMTREND (1-877-266-8736)