BRP E250DHLSCS Service Manual page 38

INSTALLATION AND PREDELIVERY
BOAT RIGGING
Place floor bracket on center line between end
lines. Use the inner bracket holes as guides to drill
two 5/32 in. (4 mm) pilot holes.
3 G (11.4 L) T
ALLON
Place rods into floor bracket and secure floor
bracket with lag bolts.
1
2
1. Rods
2. Lag bolts
Place oil tank onto floor bracket. Assemble cross-
bar onto hook rods, install flat washers and lock-
nuts. Tighten locknuts to securely hold tank.
1
1. Crossbar
36
COB5381
ANK
DRC7418
1.8 G
ALLON
Place rods into floor bracket and secure floor
bracket with lag bolts.
1
2
1. Rods
2. Lag bolts
Place oil tank onto floor bracket. If cover is not
pre-assembled, route oil supply hose and harness
through the cover and position cover on the oil
tank. Attach spring-loaded rods to cover.
1
2
22241B
T
ANK
1
2
22149A
48704