Tilt Piston Removal - BRP E250DHLSCS Service Manual

TRIM AND TILT
TRIM AND TILT SERVICE
solvent and inspect it for tears, clogging, or other
damage.
1
1. Coupler
2. Filter screen
Remove the three Allen head screws securing the
pump manifold assembly to cylinder body.
Individual parts in the pump man-
IMPORTANT:
ifold assembly are not available separately. Do
not remove pump or any control valves from the
body.
334
Remove the manifold. Remove five O-rings from
cylinder body. Check machined surfaces for nicks
and scratches.
2
41763

Tilt Piston Removal

Use Tilt Cylinder End Cap Remover/Installer,
P/N 326485, or Universal Spanner Wrench,
P/N 912084, and a breaker bar to unscrew the tilt
rod end cap.
41798
Drain the fluid from above the piston.
41799
41788
41789