GEARCASE – COUNTER ROTATION
SHIFTER, BEARING AND SEAL SERVICING
SHIFTER, BEARING AND
SEAL SERVICING
Shift Housing Disassembly
WARNING
Wear safety glasses to avoid injury.
The shift housing and bearing
IMPORTANT:
are serviced as an assembly. If either are worn or
damaged, replace the complete assembly.
Insert a suitable tool under one end of the clutch
dog spring and remove it from its groove by
unwrapping it from around the clutch dog. Dis-
card the spring.
1. Clutch dog spring
Push the pin out of the clutch dog. Remove all
components from the shaft.
1. Pin
302
Remove the gear, thrust bearing, and thrust
washer from the shift housing.
2
1. Gear
2. Thrust bearing
3. Thrust washer
IMPORTANT:
reverse gear on counter rotation gearcases.
Remove the shift lever pin from the housing.
1
Remove shift shaft, cradle and shift lever. Move
shifter detent as needed to help ease removal of
parts.
006887
1. Pin
Wear safety glasses to avoid personal
injury. The detent ball and spring and
come out with great force.
1
006930
The shift housing supports the
WARNING
1
3
006931
1
006861