gearcase. Align and level gearcase assembly in
fixture as shown. Secure fixture to floor press.
3
4
1
1. Gearcase fixture, P/N 354059
2. Vertical alignment screws
3. Handle P/N 345822
4. M2 Adapter P/N 353057
Housing must be completely seated in gearcase
to install retainer screws. Bearing housing is
approximately level with gearcase.
GEARCASE – STANDARD ROTATION
Apply Ultra Lock to threads and install two retain-
ing screws. Tighten screws to a torque of 18 to 20
ft. lbs. (24 to 27 N·m).
2
1. Retainer screws
Final Assembly and Adjustment
To complete gearcase assembly, refer to:
GEARCASE LEAK TEST on p. 270
•
WATER PUMP SERVICE on p. 274
•
SHIFT ROD ADJUSTMENT on p. 277
•
006927
•
GEARCASE
TION on p. 271
Gearcase Lubricant on p. 77
•
Propeller Hardware Installation on p. 65
•
Trim Tab Adjustment on p. 68
•
006928
GEARCASE ASSEMBLY
REMOVAL
AND
INSTALLA-
1
006835
13
299