GEARCASE – STANDARD ROTATION
SHIFTER, BEARING AND SEAL SERVICING
SHIFTER, BEARING AND
SEAL SERVICING
Shift Housing Disassembly
WARNING
Wear safety glasses to avoid injury.
The shift housing and bearing
IMPORTANT:
are serviced as an assembly. If either are worn or
damaged, replace the complete assembly.
Insert a suitable tool under one end of the clutch
dog spring and remove it from its groove by
unwrapping it from around the clutch dog. Dis-
card the spring.
1. Clutch dog spring
Push the pin out of the clutch dog. Remove all
parts.
1. Pin
284
Remove the gear, thrust bearing, and thrust
washer from the shift housing.
2
1. Gear
2. Thrust bearing
3. Thrust washer
Remove the shift lever pin from the housing.
Remove shift shaft, cradle and shift lever. Move
shifter detent as needed to help ease removal of
parts.
1
5
1
006887
1. Shift lever pin
2. Shift shaft
3. Cradle
4. Shift lever
5. Shifter detent
Wear safety glasses to avoid personal
injury. The detent ball and spring and
come out with great force.
1
006888
WARNING
1
3
006889
4
3
2
006890