Shift Rod Adjustment - BRP E250DHLSCS Service Manual

SHIFT ROD
ADJUSTMENT
Check the shift rod height from the shift rod hole
to the surface of the gearcase using Universal
Shift Rod Height Gauge, P/N 389997.
With the gearcase in NEUTRAL, rotate the shift
rod up or down as necessary for correct adjust-
ment. Once correct height is achieved, rotate rod
one half turn or less to direct offset forward.
IMPORTANT:
step design. Make sure the NEUTRAL detent ball
is in the center step before checking shift rod
height.
Shift Rod Heights
Model
20 in. (L)
25 in. (X)
30 in. (Z)
COA6166
GEARCASE

SHIFT ROD ADJUSTMENT

The NEUTRAL detent is a two-
Type Height
21 29/32 in.
"L2"
(21.906 in./ 556 mm)
"M2"
± 1/2 Half Turn
26 29/32 in.
"L2"
(26.906 in./ 683 mm)
"M2"
± 1/2 Turn
31 29/32 in.
"M2" (31.906 in./ 810 mm)
± 1/2 Turn
13
277