Exhaust Housing Installation - BRP E250DHLSCS Service Manual

MIDSECTION
EXHAUST HOUSING

Exhaust Housing Installation

Bring the exhaust housing into position with the
stern bracket.
Install four new lower mount screws with lock-
patch. Tighten screws to a torque of 38 to 45 ft.
lbs. (51 to 61 N·m).
1. Lower mount screws
Apply Ultra Lock to upper mount screws and
tighten to a torque of 50 to 60 ft. lbs. (68 to 81
N·m).
258
Attach the ground lead and star washer to the
steering arm's starboard side.
1
If necessary, replace the exhaust adapter to lower
engine cover seal. Attach with Adhesive 847.
32590
Install gearcase. Refer to Gearcase GEARCASE
REMOVAL AND INSTALLATION on p. 271.
Install powerhead.
INSTALLATION on p. 237.
7716
Refer to
POWERHEAD
32586
32585