BRP E250DHLSCS Service Manual page 259

Install four mount plate screws and washers and
tighten to a torque of 22 to 24 ft. lbs. (30 to 33
N·m).
Tighten the small adapter to exhaust housing
screws and nuts to a torque of 60 to 84 in. lbs. (7
to 9.5 N·m).
If removed, coat the lower mounts with soapy
water and press into the exhaust housing with the
"OUTSIDE" mark facing outward.
006986
Install the mount covers. Apply Nut Lock to
screws, install washers and screws, and tighten to
a torque of 156 to 180 in. lbs. (18 to 20 N·m).
13691
MIDSECTION
EXHAUST HOUSING
23033
32579
257
12