Exhaust Housing Disassembly - BRP E250DHLSCS Service Manual

Evinrude e-tec series 250, 300 hp 90 v6 (3.4l)

Table of Contents

EXHAUST HOUSING

Exhaust Housing Disassembly

Remove two front adapter to outer exhaust hous-

Remove three nuts at rear of the adapter.

Loosen and remove the upper mount plate screws

and remove the mount plate.

Lubricate the upper mount with soapy water and

pry up to remove it from the adapter housing.

Lift the adapter/inner exhaust housing out of the

exhaust housing.

Table of Contents