Exhaust Housing; Exhaust Housing Removal - BRP E250DHLSCS Service Manual

EXHAUST HOUSING

Exhaust Housing Removal

Before removing the midsection:
The gearcase must be removed. Refer to Gear-
•
case GEARCASE REMOVAL AND INSTAL-
LATION on p. 271.
The powerhead must be removed. Refer to
•
POWERHEAD REMOVAL on p. 215.
Remove and discard four lower mount screws.
Remove the steering arm ground lead and screw.
Remove two upper mount screws.
1
1. Ground lead (removed)
Remove the exhaust housing.
Remove lower mount covers and inspect the
lower mounts.
32590
TYPICAL
If replacement is necessary, lubricate mount with
soapy water and carefully pry at both ends to
remove.
32589
MIDSECTION
EXHAUST HOUSING
006979
23033
32578
253
12