Tilt Tube; Removal - BRP E250DHLSCS Service Manual

Evinrude e-tec series 250, 300 hp 90 v6 (3.4l)

Table of Contents

TILT TUBE

The tilt tube may be serviced without major disas-

sembly of the outboard using Tilt Tube Service Kit,

Support the outboard with a suitable hoist.

Pull the locking tabs on the tilt limit cam loose

from the collar.

1. Locking tabs

Remove the cam and collar from the tilt tube.

Remove the nut from the starboard side.

Thread the spacer from Tilt Tube Service Kit,

P/N 434523, onto the starboard end of the tilt

Remove steering cable wiper nut from tilt tube.

Thread the adapter from Tilt Tube Service Kit,

P/N 434523, onto the port end of the tilt tube.

Table of Contents