BRP E250DHLSCS Service Manual page 218

POWERHEAD
POWERHEAD REMOVAL
Remove trim/tilt harness from clamp.
2
1. Trim harness
2. Clamp
Remove screw and washer from shift rod lever to
release the lower shift rod.
1. Shift rod pin
Remove flywheel. Refer to FLYWHEEL AND
STATOR SERVICING on p. 145.
Securely fasten Lifting Fixture, P/N 396748, to
crankshaft threads.
216
Fasten appropriate chain hook to eye of tool and
support weight of powerhead with hoist.
1
005041
On each side, remove the powerhead retaining
screws and nuts.
1
1
004241
1. Screws and nuts
Remove the rear powerhead nut.
1. Rear powerhead nut
Use a suitable tool to carefully separate the pow-
erhead from exhaust housing.
IMPORTANT:
adapter mating surfaces when separating.
Do not damage the powerhead
48758
1
1
004240
1
004252