Powerhead Removal - BRP E250DHLSCS Service Manual

POWERHEAD REMOVAL

WARNING
Protect against hazardous fuel spray.
Before starting any fuel system service,
carefully relieve fuel system pressure.
Refer to Relieving Fuel System Pressure
on p. 174.
To prevent accidental starting while ser-
vicing, disconnect the battery cables at
the battery.
Remove lower motor covers. LOWER COVER
SERVICE on p. 89.
Disconnect diagnostic connector from clip and
remove flywheel cover.
1
2
1. Diagnostic connector
2. Flywheel cover screw
Remove air temperature sensor from air silencer.
Remove the air silencer.
1
1. Air temperature sensor
Remove water hoses and exhaust back pressure
hose from adapter.
2
1. Cooling hose (to exhaust plenum)
2. Cooling hose (from vapor separator)
1
2
1. Cooling hose (to exhaust plenum)
2. Exhaust back pressure hose (to EMM)
Disconnect power trim connectors.
004237
1
1. Trim/tilt connectors
004219
POWERHEAD
POWERHEAD REMOVAL
004239
005042
004251
1
1
11
215