BRP E250DHLSCS Service Manual page 181

Remove injector screws.
1. Injector screws
Remove fuel injector and insulator.
Crush Ring Replacement
Injector crush rings must be
IMPORTANT:
replaced if injector is installed in a different head
or cylinder location.
Use Slide Hammer assembly, P/N 391008, with
Slide Hammer Adaptor kit, P/N 390898, compo-
nents to remove injector from mounting cup.
Thread adaptor and stud into face of injector. Hold
mounting cup securely. Work slide hammer to
separate injector from mount housing.
Remove adaptor from injector. Remove crush ring
and O-rings from injector. Inspect and clean injec-
FUEL COMPONENT SERVICING
tor filter. Install new crush ring and O-rings. Lubri-
cate O-rings with STP
1
004267
1. Adaptor
1. Crush ring
2. O-rings
Install injector into mount housing. Press on injec-
tor face until injector seats in mount housing.
002345
FUEL SYSTEM
†
Oil Treatment.
002196
002317
002318
179
1
2
1
8