Power Button Board - HP 14s Maintenance And Service Manual

Power button board

Description
Power button board
Power button board cable
Before removing the power button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the system board (see
7. Remove the speakers (see
8. Remove the display (see
To remove the power button board:
1. Remove the Phillips PM2.0×3.0 screw (1) that secures the power button board to the computer
2. Remove the power button board from the computer (2).
Reverse this procedure to install the power button board and cable.
Bottom cover on page
Battery on page 34).
System board on page
Speakers on page 55).
Display assembly on page
32).
51).
56).
Component replacement procedures
Spare part number
929642-001
927915-001
63