Speakers - HP 14s Maintenance And Service Manual

Speakers

Description
Speakers (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the system board (see
To remove the speakers:
1. Remove the Phillips PM2.0×5.0 screw (1) that secures the right speaker to the computer.
2. Remove the cable from its routing path along the bottom of the computer (2), and then remove the
speakers from the computer (3).
Reverse this procedure to install the speakers.
Bottom cover on page
Battery on page 34).
System board on page
32).
51).
Component replacement procedures
Spare part number
929647-001
55