Touchpad Board - HP 14s Maintenance And Service Manual

TouchPad board

Description
TouchPad board for use in black models
TouchPad board for use in white models
TouchPad board for use in blue models
TouchPad bracket
TouchPad board cable
Before removing the TouchPad board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
To remove the TouchPad board:
1. Disconnect the cable from the system board (1).
2. Remove the conductive tape from the TouchPad (2).
3. Remove the three Phillips PM2.0×3.0 screws (1) that secure the bracket to the computer, and the lift the
bracket from atop the TouchPad (2).
48 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 34).
32).
Spare part number
929643-001
929644-001
L00442-001
926851-001
927916-001