HP 240 G4 Maintenance And Service Manual page 64

Description
● Intel Core i3-4005U processor
For use in HP 240/246 G4 models:
Discrete graphics memory
● Intel Core i5-5200U processor and 2 GB of discrete graphics memory
● Intel Core i3-4005U processor and 2 GB of discrete graphics memory
UMA graphics memory
● Intel Core i5-5200U processor on models with GLAN
● Intel Core i3-5010U processor
● Intel Core i3-5005U processor on touch screen models
● Intel Core i3-4005U processor
Intel Pentium N3700 processor
●
● Intel Pentium N3825U processor on models with GLAN
● Intel Celeron N3050 processor with 2 GB of on-board system memory
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive (see
6. Remove the bottom cover (see
7. Remove the hard drive (see
8. If applicable, remove the eMMC drive (see
NOTE: When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 30).
Optical drive on page
Bottom cover on page
Hard drive on page 37).
eMMC drive on page
31), if installed.
34).
39).
Spare part
number
814044-001,-5
01, -601
817889-001,-5
01, -601
817887-001,-5
01, -601
826037-001,
-601
817888-001,-5
01, -601
824441-001,
-601
817886-001,-5
01, -601
817891-001,
-601
824440-001,-5
01, -601
814051-001,-5
01, -601