Table of Contents
Advertisement
5.
Remove the camera cable and one antenna cable from their routing at the top of the chassis (6).
6.
Remove the four Phillips M2.5 × 4.5 screws (1) that secure the display to the computer.
7.
Open the computer to open the hinges (2).
8.
Separate the computer from the display (3).
9.
If you need to replace display assembly subcomponents:
a.
Remove the three Phillips M2.0 × 3.0 screws (1) that secure the bezel to the display.
b.
Slide a flat tool (2) under each side of the bezel to remove it (3).
The bezel is available as spare part number M59381-001.
Component replacement procedures
41
Advertisement
Table of Contents
