Table of Contents
Advertisement
2.
Remove the bracket from the computer (2).
Reverse this procedure to install the lock bracket.
USB board
To remove the USB board, use this procedure and illustration.
Table 5-10
USB board description and part number
Description
USB board
USB board cable, HS
USB board cable, LS
Before removing the USB board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the fan (see
Remove the USB board:
1.
Remove the tape from the connectors on the USB board (1).
2.
Disconnect the two cables from the reverse ZIF connectors on the USB board (2).
3.
Remove the four Phillips M2.0 × 2.0 screws (3) that secure the board to the computer.
36
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page
27).
Fan on page
32).
26).
Spare part number
M57287-001
M57285-001
M57286-001
26).
Advertisement
Table of Contents
