Table of Contents
Advertisement
Table 5-7
Fan description and part number
Description
Fan assembly
Before removing the fan, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the fan assembly:
1.
Disconnect the fan cable from the system board (1).
2.
Remove the three Phillips M2.0 × 3.0 screws (2), and then remove the fan (3).
Reverse this procedure to install the fan assembly.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 5-8
Heat sink descriptions and part numbers
Description
Heat sink
Before removing the heat sink, follow these steps:
Preparation for disassembly on page
Bottom cover on page
Battery on page
27).
26).
Component replacement procedures
Spare part number
M02014-001
26).
Spare part number
M00434-001
33
Advertisement
Table of Contents
