TP-Link TL-WPA4220 Quick Installation Manual

Quick Installation Guide
300Mbps AV500 WiFi Powerline Extender
TL-WPA4220
MODEL NO.
Hardware Connection
1. Make sure your router can access the Internet.
2. Make sure your computer is set to "Obtain an IP address automatically".
3. Connect your powerline adapter to the router's LAN port, and plug it into a wall socket.
4. Plug the Wi-Fi Powerline Extender into a wall socket.
5. Make sure the Powerline LEDs are solid on. A powerline network is established between the powerline adapter
and the extender.*
* If the Powerline LEDs are o , please refer to Appendix: Pair Button on the next page to create a powerline network.
Powerline Adapter
SSID: abc
Password: a1b2c3d4
Wireless Router
POWER WPS RESET USB INTERNET 1 2 LAN 3 4
7106504744 REV1.0.0
Package Contents
300Mbps AV500 WiFi Powerline Extender
MODEL NO. TL-WPA4220
Wi-Fi Powerline Extender QIG
Resource CD
Ethernet Cable
(For Windows Only)
Warning Before Installation
Wi-Fi Powerline Extender
SSID: TP-LINK_xxxxxx
Password: 01234567
Basic Information
Pair Button
Pair
Reset Button
Reset
Please write down the default SSID and Wireless Password of your
TL-WPA4220
AV500 WiFi Powerline Extender
Wi-Fi Powerline Extender according to the bottom label.
Power: 100-240V~ 50/60Hz 0.15A
Default Wireless Access:
http://tplinkplclogin.net
The default SSID is TP-LINK_××××××. (×××××× indicates the last
WLAN MAC: 78CD8E81A715
Username/Password:
Powerline MAC: 78CD8E81A716
admin/admin
six unique characters of WLAN MAC address.)
Password: ABCD-ABCD-ABCD-ABCD
Wireless Password: 01234567 SSID: TP-LINK_
S/N: XXXXXXXXXXXX
Wireless Password:
Unify and Extend Wi-Fi Network
In a uni ed Wi-Fi network, your wireless clients (such as laptop and smartphone) can automatically switch between
the extender's and router's wireless networks.
Option 1: Wi-Fi Clone
(Recommended for routers supporting WPS)
1. Plug the extender into a wall socket near your router.
2. Make sure the extender's Wi-Fi LED blinks quickly.
Blink Quickly*
* If the Wi-Fi LED is o , press and hold the Wi-Fi/Wi-Fi Clone
button for more than 5 seconds to enable the wireless
function.
3. Press the WPS button on your router.
Wireless Router
WPS
POWER WPS RESET USB INTERNET 1 2 LAN 3 4
Press
Power LED (On/O /Blink)
Poweline LED (On/O /Blink)
Ethernet LED (On/O )
Wi-Fi/Wi-Fi Clone LED (O /Blink Slowly/Blink Quickly)
Wi-Fi/Wi-Fi Clone Button
Ethernet Ports
4. Press the Wi-Fi/Wi-Fi Clone button on the extender.
Within...
1
Minute
Blink
Press
Slowly
* If the Wi-Fi LED still blinks slowly after 1 minute, unplug the
extender, plug it back and try again.
After Wi-Fi Clone, the extender has copied your
router's SSID and wireless password.
SSID: abc SSID: abc
Password: a1b2c3d4 Password: a1b2c3d4
Wireless Router Wi-Fi Powerline Extender
5. Now you can plug the extender into any wall
socket under the same electric meter as your
router's.
Blink
Quickly*