Health O Meter 600KL-BT User Instructions page 8

600KL-BT ASSEMBLY INSTRUCTIONS (continued)
4. Plug the load cell cable connector into the
load cell plug in the platform base. The
base of the scale has been designed to
provide wire management for the load cell
cable. Route the load cell cable as shown.
5. After plugging in the load cell cable, slide
the section of plastic tubing surrounding
the cable upwards.
6. Tuck the cable and tubing into the
protective guide in the underside of the
scale platform. This holds the cable in
place and protects it from being damaged.
plastic tubing
tuck into
protective
guide
8
Load cell cable port