Health O Meter 600KL-BT User Instructions page 12

OPERATING INSTRUCTIONS (CONTINUED)
Height Measurement Instructions
WARNING: Use caution when sliding height rod up and down. The rod should move smoothly. Do
not move the rod in a jerking motion. Fold headpiece down when not in use.
A patient must be at least 23-5/8" (60cm) tall for the height to be accurately measured.
Note:
1. Press the WEIGHT/HEIGHT/BMI button
once. The scale will display "----" until the
height rod or headpiece is moved. With the
headpiece in the folded down position, slide
the headpiece up or down to the estimated
height of the patient. Then raise the
headpiece into its horizontal position.
Note: For patients under 44", slide the
headpiece down the pillar.
Note: When moving the headpiece, ensure
the height rod and headpiece stay together.
2. Ask the patient to step on the scale. Position
the patient facing the display head. Ensure
that the patient's posture is upright, and that
the patient's head is straight and level. Slide
the headpiece down until it gently rests on
the patient's head. The display will show the
patient height.
Press the RESET button to revert back to
weight display.
Patients above 44"
12
Patients below 44"