Restarting The Revolving Door Control; Restarting The Sliding Door Control - Record K21 User Manual

7.2.1

Restarting the revolving door control

Procedure
Press until the BDE-D dis-
play appears.
Press key briefly, if no re-
start (no) has to be per-
formed.
Press key briefly, when a
restart (yes) has to be per-
formed.
Restart lock is activated
Unlock restart lock:
Press the following key se-
quence
* The restart process is
complete.
* If the control unit reports a new error after restarting the control, please contact your service centre
and state the error message.
7.2.2

Restarting the sliding door control

Procedure
Press until the BDE-D dis-
play appears.
Press briefly, if no restart
(no) has to be performed.
Press key briefly, when a
restart (yes) has to be per-
formed.
* The restart process is
complete.
* If the control unit reports a new error after restarting the control, please contact your service centre
and state the error message.
BAL_K21_EN_3V3_BLA_121-006423019
Key BDE-D Display
Previously set oper-
ating mode
The previously set
operating mode is
displayed.
Key BDE-D display
Previously set oper-
ating mode
The previously set
operating mode is
displayed.
Troubleshooting
Function
Depending on the mode selected.
There is no restart.
The system carries out the previ-
ous mode set.
Reset control is activated. Rotor
stops. When finised the restart lock
is activated.
Rotor stops.
The rotary unit starts a synchroniz-
ing run and rotates max. 360° at
slow speed until it reaches the start
position.
The revolving door operates in the
displayed mode.
Function
Depending on the mode selected.
There is no restart.
The system carries out in the pre-
vious mode.
Reset control is activated. Rotor
stops. When finished the restart
lock is activated.
The sliding door operates in the
displayed mode.
7
41 / 44