Record K21 User Manual page 39

361 SL-RSF1 / RSF1 >
60s active
362 SL-RSF2 / RSF2 >
60s active
363 SL-TRKA > 60s active
364 SL-TRKA > 60s active
365 SL-VSR1 > 60s active
366 SL-VSR2 > 60s active
375 TA-BEHA > 60s active
376 TA-BEHI > 60s active
377 TA-SRT1 > 60s active
378 TA-SRT2 > 60s active
379 Main switch TA-HAS
380 Emergency stop TA-
NHTA
381 Emergency stop TA-
NHTI
395 SL-RSF1 / RSF1 error
396 SL-RSF2 / RSF2 error
397 SL-TRKA error
398 SL-TRKI error
BAL_K21_EN_3V3_BLA_121-006423019
Safety strip activated or radial protective sliding wing displaced for longer
than 60 sec.
– Check that no objects are activating the safety strip and that the radial
protective sliding wing is not displaced.
Safety strip activated or radial protective sliding wing displaced for longer
than 60 sec.
– Check that no objects are activating the safety strip and that the radial
protective sliding wing is not displaced.
Safety strip drum edge activated for longer than 60 sec.
– Check that no objects are activating the safety strip.
Safety strip drum edge activated for longer than 60 sec.
– Check that no objects are activating the safety strip.
Safety strip radial fixed wing 1 activated for longer than 60 sec.
– Check that no objects are activating the safety strip.
Safety strip radial fixed wing 2 activated for longer than 60 sec.
– Check that no objects are activating the safety strip.
Disabled person button exterior activated longer than 60 sec.
– Check that the button is not blocked.
Disabled person button interior activated longer than 60 sec.
– Check that the button is not blocked.
Start button 1 on revolving unit activated longer than 60 sec.
– Check that the button is not blocked.
Start button 2 on revolving unit activated longer than 60 sec.
– Check that the button is not blocked.
Revolving door turned off via main power switch.
– If no hazard exists, turn main power switch on.
Emergency stop button exterior activated.
– If no hazard exists, reset the emergency stop button.
Emergency stop button interior activated.
– If no hazard exists, reset the emergency stop button.
Safety strip or radial protective sliding wing has internal evaluation error.
– Press safety strip.
– If evaluation error does not disappear, contact your service centre.
Safety strip or radial protective sliding wing has internal evaluation error.
– Press safety strip.
– If evaluation error does not disappear, contact your service centre.
Safety strip drum edge exterior has internal evaluation error.
– Press safety strip.
– If evaluation error does not disappear, contact your service centre.
Safety strip drum edge inte-rior has internal evaluation error.
– Press safety strip.
– If evaluation error does not disappear, contact your service centre.
Troubleshooting
39 / 44
7