Accessories - Record K21 User Manual

5
Operation
5.11

Accessories

Timer
Switching form AUTOMATIC operating mode to OFF operating mode and back can be done using a
timer.
Door passage lighting
If the normal ambient lighting is not sufficient, then suitable integral lighting must be provided.
The quantity and type of lighting required for this revolving door is defined in the list of components or
in the construction drawings.
Alarm contact
Alarm contact* to be connected to the building automation system, which is activated when there is a
malfunction in the door control system.
* potential free relay changeover contact, maximum contact load: 24volt AC / DC / 0.3 ampere
Main power switch
By pressing or turning the main power switch, the revolving door is completely disconnected form the
mains voltage.
Battery
Power failure emergency reaction. Depending on the configuration and the operating condition of the
revolving door, either the revolving door will remain locked or the rotation unit will move to the cross
position and releases the battery supported sliding door operation.
Optional:
UPS battery back up for extended battery operation of the sliding door.
32 / 44 BAL_K21_EN_3V3_BLA_121-006423019