Lock Control Unit Via Key Panel; Operation Lock Via Key Switch - Record K21 User Manual

5
Operation
NOTICE
A reduced opening width is also available in the operating modes ONE WAY and PERA-
MENTLY OPEN.
NOTICE
Exiting the sliding door operation and resuming the revolving door operation is done by se-
lecting the desired revolving door operation on the control unit BDE-D-KTA. It does not matter
what position the wings of the sliding doors are currently in. The sliding doors will automatic-
ally close, if still open, before the revolving door starts to rotate.
5.3

Lock control unit via key panel

CAUTION
Dangerous situation through one-time opening of the sliding door while the revolving door is
in operation
Injuries and/or damages
a) The lock on the control unit of the sliding door must always be on when the revolving door is in
operation!
Locking the control unit
Press key sequence
Unlocking the control unit
Press key sequence
5.4

Operation lock via key switch

Locking the control unit
28 / 44
Symbol Description
– The control panel keys are locked.
– It is difficult to manipulate the control unit.
– The status of the lock is shown on the BDE-D display.
Symbol Description
– The control panel keys are activated.
– Free selection of operating modes and special functions
are available.
The key switch is used to unlock or block the BDE-D-KTA control unit for the
revolving door. Only a specific group of people are entitled to lock or unlock as
well as operate the revolving door.
BAL_K21_EN_3V3_BLA_121-006423019