Installation; Ambient Temperature; Before Placing Food In The Appliance; Power Failure - THOMSON THFZ 190 Instruction Manual

INSTALLATION
Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to
direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on each side of
the cabinet.
For uneven surfaces, front feet can be aligned.
To install the handle
1. Remove the hole covers from the side of the door.
2. Align the holes of the handle with the ones on the
side of the door.
3. Insert the supplied screws into the holes and fully
tighten them.
4. Insert the supplied screw covers on the handle.
AMBIENT TEMPERATURE
This appliance is designed to operate in ambient temperature between 16°C and 43°C (N/ST/T). If these
temperatures are exceeded, i.e. colder or warmer, the appliance will not operate correctly. If the
ambient temperatures are exceeded for long periods, the temperature in the freezer will rise above
‐18℃ and food spoilage may occur.
BEFORE PLACING FOOD IN THE APPLIANCE
• Remove all packaging.
• Allow the appliance to run empty for 2 – 3 hours so the compartment can cool to the appropriate
temperature.
• Clean the inside of the appliance with warm water and a little liquid detergent to remove
manufacturing and transportation dust.
POWER FAILURE
If there is a power failure, do not open the door. Frozen food should not be affected if the power failure
lasts for less than 12 hours.
Do not refreeze frozen foods that have thawed completely. The food may be dangerous to eat.
6
6