Speakers; Usb Board - HP Chromebook 11a Maintenance And Service Manual

Speakers

To remove the speakers, use this procedure and illustration.
Table 5-4 Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the four Phillips M2.0 × 4.0 screws (2) that secure the speakers to the bottom cover.
3. Remove the tape from the wire between the speakers (3).
4. Remove the speakers from the computer (4) .
Reverse this procedure to install the speakers.

USB board

To remove the USB board, use this procedure and illustration.
Table 5-5 USB board description and part number
Description
USB board
NOTE: The USB board cable is available as spare part number M15711-001.
(Preparation for disassembly on page
(Bottom cover on page 18).
(Battery on page 20).
Component replacement procedures
Spare part number
M15724-001
18).
Spare part number
M15716-001
23