Elkay 374C-1 Instruction Manual

Instruction Guide
–
FLUSH MOUNT
PIR TIMER
374C-1
3 wire
The Flush Mount PIR Timer (3 wire)
is part of the Elkay family of switches,
timers and detectors which save
energy and increase convenience in
and around your home, garden
or premises.
Rating at 220-240V ac 50Hz
•
All load types 6A
•
Time Delay: 30secs - 30min
• Manual Lux Sensor for daylight control
Usage
The PIR sensor has been designed to switch
lighting, heating and ventilation loads up
to 6A. The unit is switched on by the
detection of moving infra red heat within
a specified range. When infra red heat, such
as a moving body, is no longer detected,
the unit will switch off the load after the
adjustable time period has elapsed.
If infra red heat is detected again during the
timing period, the timing sequence will
restart. The unit has a lux level adjustment
which measures the ambient light levels
and prevents lighting being switched on,
when there is sufficient lighting in the room.
A power factor correction capacitor of 4
microfarads may be required when
switching low wattage loads, e.g. LED loads.
The capacitor is fitted across switch live
and neutral supplies of suitable Elkay
capacitors can be found at your stockist
(ref. pfcc-1).
Do not insulation resistance test this
product. Remove before testing or test
circuit prior to fitting.
BDH
BROOK DESIGN
HARDWARE LTD
BDH
BR
HA