Resetting The Control Module; Control Unit Bde-D Does Not React - Record C 127 X SU H-B OFFSET User Manual

Back to main display by pressing the key or automatically after 20 seconds.
NOTICE
You will find the detailed description of the error numbers and remedial actions in Book B8A
102-020401150.
7.2

Resetting the control module

In some cases, the malfunction may be remedied by restarting the control unit. Please proceed as de-
scribed below.
– Make sure that the drive cladding is closed and that nobody is obstructing the system or ap-
proaching it, thereby triggering an opening of the system.
Button Selection
No
Yes
– Restart of the installation is performed.
– The first movement after a reset occurs at reduced speed.
– If a fault is still displayed on the control unit after resetting, please contact our service centre stat-
ing the error message.
7.3

Control unit BDE-D does not react

If the control panel does not react when the keys are pressed or if no message appears on the dis-
play, a reset of the control panel could eliminate the problem.
Proceed as follows:
RESET HARDWARE BDE-D
BAL_C127_X_SU_H-B_OFFSET_EN_1V1_REC_121-006454632
Display
Press > 5 seconds
Press E key > 12 seconds
Display without any message
7
Malfunctions
29 / 32