1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
4.
Remove the heat sink (see
Remove the display assembly:
1.
Disconnect the antenna cables from the integrated WLAN module (1).
2.
Disconnect the touch cable from the system board (2).
3.
Disconnect the display cable from the system board (3).
4.
Remove the four Phillips M2.5 × 5.0 screws (1) that secure the display to the computer.
5.
Open the computer to open the hinges (2).
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page
21).
Battery on page
23).
Heat sink on page
28).
21).