Display Assembly - HP Chromebook x360 14c Maintenance And Service Manual

Table 5-13 USB door description and part number
Description
USB door
Before removing the USB door, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
4. Remove the system board (see
Remove the USB door:
1. Insert a removal tool (1) under the USB door (2).
2. Align the posts on the tool with the slots on the underside of the door (3), and then pull the tool away
from the door to release it (4).
3. Remove the USB door from the computer (5).
Reverse this procedure to install the USB door.

Display assembly

To remove and disassemble the display assembly, use these procedures and illustrations.
NOTE: Display assemblies are offered as spare parts only at a subcomponent level.
Before removing the display panel, follow these steps:
(Preparation for disassembly on page
(Bottom cover on page 21).
System board on page
21).
Battery on page 23).
33).
Component replacement procedures
Spare part number
M01320-001
37