Volume Button - HP Chromebook x360 14c Maintenance And Service Manual

Remove the power button:
1. From the inside of the computer, lift the rear of the power button (1).
2. Remove the power button from the computer (2).
Reverse this procedure to install the power button.

Volume button

To remove the volume button, use this procedure and illustration.
Table 5-10 Volume button description and part number
Description
Volume button (includes rubber bumper)
Before removing the volume button, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
4. Remove the USB board (see
Remove the volume button:
1. Remove the rubber bumper from the computer (1). Be sure to note the installation location of the
bumper.
(Preparation for disassembly on page
(Bottom cover on page 21).
USB board on page 29).
21).
Battery on page 23).
Component replacement procedures
Spare part number
M00320-001
31