Power Button - HP Chromebook x360 14c Maintenance And Service Manual

Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
Remove the USB board:
1. Disconnect the two cables from the USB board ZIF connectors (1).
2. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the board to the computer.
3. Remove the board from the computer (3).
Reverse this procedure to install the USB board.

Power button

To remove the power button, use this procedure and illustration.
Table 5-9 Power button description and part number
Description
Power button
Before removing the power button, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
4. Remove the USB board (see
30 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page 21).
(Preparation for disassembly on page
(Bottom cover on page 21).
USB board on page 29).
21).
Battery on page 23).
21).
Battery on page 23).
Spare part number
M00319-001