Page 1
USER MANUAL Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the Smart Lock property of their respective owners.
Page 2
TABLE OF CONTENTS 02 19 What's Included Specifications 03 19 Product Overview Troubleshooting 04 21 Getting Started Important Safety Instructions 06 21 Installing the Smart Lock Notice 13 24 Setting up the Smart Lock Customer Service Basic Operations English 01...
GETTING STARTED • Backset (2 '' / 60 mm or 2¾'' / 70 mm) • Diameter of door hole (1'' / 25 mm) • Door thickness (1 '' / 35 mm - 2 '' / 55 mm) Download eufy Security App Backset Download the eufy Security App from the App Store (iOS devices running version 2⅜"...
Page 5
INSTALLING THE SMART LOCK Step 1 Install the Deadbolt To install deadbolt: 1. Measure your door’s backset dimension: whether it is 2¾'' / 70 mm or 2 '' / 60 mm. 2. If your door’s backset dimension is 2 '' / 60 mm, use the provided deadbolt to install. If your door’s backset is 2¾'' / 70 mm, turn the faceplate 180°...
Page 6
Step 3 Install the Exterior Assembly To install the exterior assembly into the doorframe: 1. Measure your crossbore dimension and determine the installation steps accordingly. • If the diameter of a crossbore is 2 '' / 54 mm, use the provided spacer to assist in installing the exterior assembly.
Step 4 Install the Mounting Plate Step 5 Install the Interior Assembly 1. Route the cable through the mounting plate. To install the Interior Assembly: 2. Fix the mounting plate into the interior doorframe using the mounting plate screws. 1. Remove the battery cover. Make sure the screws go through the holes of the deadbolt and the mounting plate, 2.
SETTING UP THE SMART LOCK Pair Your Phone with Smart Lock Note: Before inputting your fingerprint, anyone can lock the door using fingerprint. We recommend setting an access code first. After the access code is set, others’ fingerprints cannot be used to lock or unlock the door. To pair your phone with smart lock: 1.
• Successfully calibrated: Confirmation button LED turns white for 2 seconds and then off. The voice prompt “calibration complete” is heard. • Fail to calibrate: The button and status LED turn solid red for 2 seconds and then off. The voice prompt “The deadbolt is stuck. Please return to the installation, and try again.”...
BASIC OPERATIONS Other Settings The Smart Lock supports many features that you can configure using the eufy Security app. The features are listed as follows: Unlock the Door • Add up to 100 users; You can unlock the door using a valid access code, fingerprint, eufy Security app, or the •...
SPECIFICATIONS Lock the Door There are several options to lock the door. Chipset: Realtek lower-power SOC BLE; BT 5.0; Option 1: Use the fingerprint Maximum access code: 100 1. Input your fingerprint and wait until the fingerprint breathing light breathes blue once. Maximum fingerprint inputs: 50 The door will be locked within 1 second.
IMPORTANT SAFETY INSTRUCTIONS • DO NOT attempt to install or repair the product without authorization. • Do not use excessive force or sharp objects to press lock buttons, as this can damage the product. • Make sure the door is completely closed when going outside. The manufacturer does not assume responsibility for any harm caused by your improper closing the door.
Page 13
Declaration of Conformity IC RF Statement Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the When using the product, maintain a distance of 5cm from the body to ensure declaration of conformity, visit www.eufylife.com.