Power Cable - HP Chromebook x360 14a Maintenance And Service Manual

9. Remove the system board (2) by sliding it up and to the left at an angle.
To replace the system board, reverse the removal procedures.

Power cable

To remove the power cable, use this procedure and illustration.
Table 5-7 Power cable description and part number
Description
Power cable
Before removing the power cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
4. Remove the WLAN module
5. Remove the system board
Remove the power cable:
1. Turn the removed system board upside down with the rear toward you.
36 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Bottom cover on page 26).
(WLAN module on page 29).
(System board on page 33).
26).
Battery on page 27).
Spare part number
M15300-001
ENWW